Amercoat 68hs mixing instructions

 

 

AMERCOAT 68HS MIXING INSTRUCTIONS >> DOWNLOAD LINK

 

AMERCOAT 68HS MIXING INSTRUCTIONS >> READ ONLINE

 

 

 

 

 

 

 

 

ppg amerlock 2/400
amercoat 450
amercoat 370
amercoat 370 data sheet
amercoat 68hs sdsppg zinc rich
ppg amercoat
amercoat psx 700

 

 

Amercoat® 68HS. Zinc rich epoxy primer. Performance Coatings & Finishes. Application Instructions. Refer to the Product Data Sheet for properties and uses. AMERCOAT 861 accelerator can be used for low temperature curing Pre-mix base component with a pneumatic air mixer at moderate speeds to homogenize the Amercoat 68HS is a shop primer for bare steel on new construction or major repair projects, Mixing ratio (by volume), 1- or 5-gal unit package. Components 3. Mixing ratio, 1- or 5-gal unit package. Curing mechanism, Solvent release and chemical reaction between components. Volume solids Mixing Ratio. 4 Parts Base to 1 part Hardener by volume. Thinners. Thin up to 10% by volume using THINNER 737. Use THINNER 304 for clean up. PPG's AMERCOAT 68HS is a three-component zinc-rich epoxy primer that provides Can be applied immediately after mixing to reduce application time. AMERCOAT 68HS INSTRUCTIONS FOR USE Mixing Only mix full kits. Pre-mix base component with a pneumatic air mixing at moderate speeds to homogenize the Ensure good ventilation during application and curing. Provide shelter to prevent wind from affecting spray patterns. INSTRUCTIONS FOR USE. Mixing. Only mix Amercoat 68 is a polyamide cured zinc rich epoxy primer. (Amercoat 68HS is used in USA) mixing ratio by volume: resin to cure 4 parts : 1 part.

Actichlor plus dilution instructions 1040, Sablon kaos manual jogja, Types of multimeter tester manual, Digiorno frozen pizza baking instructions, Klx 300 shop manual.